If you rely on a private well in Washington, nobody else is going to test it for you. Public water in Franklin County has its own reporting, but a well sits outside that system, so the schedule is your job. This guide separates testing into two groups: routine checks you repeat on a regular cycle, and event checks you run when something changes.
Why the schedule is your responsibility
Private wells are generally unregulated, which means no agency comes around to sample the water at your tap. A lab result is only as useful as the test you ordered and the day you collected the sample. Many homes in and around Washington sit on river-bottom ground or draw from deeper bedrock, and conditions can shift with the seasons and with land use nearby. A written schedule keeps you from relying on an old result for a new situation.
Routine checks to repeat
Most homeowners start with a basic panel that covers bacteria, nitrate, and a set of common indicators. Ask the lab which tests fit your location. For wells in and around Washington, these categories are a common starting point:
- Total coliform and E. coli bacteria, the most common routine check and the first one to run after any flood or well work.
- Nitrate, which is worth watching if your well is near farm fields or an older septic system.
- Iron and manganese, which are the likely sources of orange staining and dark specks on fixtures.
- Hardness and total dissolved solids, which help explain scale on fixtures and appliances.
- pH, which affects how metals in the plumbing behave.
- Radium and gross alpha, which local water reports mention and which deeper bedrock wells in the area can carry naturally.
Repeat bacteria and nitrate testing on a cycle you write down and keep. Run the radium and gross alpha tests on a longer interval unless a previous result or a visible change in the well gives you a reason to look again sooner.
Event checks to run right away
Some changes call for a test regardless of the calendar. Order a targeted test when any of these happen:
- The area floods, or the well cap and surrounding ground were under water.
- Someone repairs, replaces, or disinfects the pump, pressure tank, casing, or wellhead.
- A new septic system is installed, an old one is repaired, or a drain field is moved nearby.
- The water changes in taste, odor, color, or clarity, including a rotten egg smell.
- The water looks different after heavy rain, even if nothing else has changed.
- You are buying a home with a private well and want a baseline before you move in.
Setting up your log
Keep a simple written or digital record with the date of each test, the lab used, the tests ordered, and the results. Add a short note for any event that prompted testing. Store the lab reports with your well logs and equipment records so the history stays in one place. When you compare results from year to year, the trend tells you more than any one reading does.
Collecting samples on schedule
Follow the lab's sampling instructions exactly. Bacteria samples need clean containers and careful handling, and some tests require a specific way of collecting the water. Run the tap for the length of time the lab requests, avoid touching the inside of the container, and get the sample to the lab within the window they specify. If a result looks unusual, ask the lab whether handling could have affected it before you decide the well has a problem. When in doubt, retest.
Reading results and deciding next steps
A single result rarely settles a question. Compare it with your earlier results and with anything that changed around the house or property. If a test flags a concern, the usual next step is a confirmation test and a conversation with a qualified water professional about options. Base your plan on the lab data and your own well records, and bring your schedule and log with you when you talk with anyone about the water.
A simple starting point
If you have never tested your Washington well, start with a full routine panel this season, write down the date and results, and set a reminder for the next routine round. Add event tests whenever the list above applies. A plain schedule and a written record give you a clearer picture to work from than memory alone.