If your home in Washington runs on a private well, the most useful paperwork may be a document you have never opened. A well log, sometimes called a driller's log or well completion report, records how the well was built and what the driller found underground. Pulling that record before you order a water test or buy treatment equipment can save time and help you ask better questions.
What a Well Log Usually Shows
Logs vary in detail, but most describe the following:
- The total depth of the well and how far the casing extends down
- The types of soil and rock layers the driller passed through
- Where water was first found and the level it rose to
- The yield measured during construction
- The date the well was drilled and the name of the contractor
- Sealing or grouting details around the casing
Depth and geology matter for water quality. Wells in the Washington area that draw from deeper bedrock can differ from shallow wells in what a homeowner may encounter, including hydrogen sulfide, naturally occurring radium, and in some cases nitrate or bacteria after flooding. A log does not tell you what is in the water, but it helps explain why a test panel might include certain items and not others.
Where to Look in Washington
- Your closing paperwork or home inspection file, if you bought the house recently.
- Previous owners, who may have kept drilling invoices or a copy from the original contractor.
- The well driller or drilling company that installed or serviced the well, if it still operates.
- State well records kept for private water wells, which are often organized by county or address.
- The county recorder or local health office, which may hold permit or inspection documents.
Search by address, then by parcel or owner name. If records are missing, that is useful information too, because it means the construction details are unknown and the well may need a closer look.
Reading the Log With a Homeowner's Eye
You do not need to be a geologist. Look for a few things: whether the casing extends into bedrock, whether there is a note about gravel packing, and whether the log mentions sulfur, gas, or mineral-rich layers. Write down any note about water with a strong odor or color during drilling. Also note the static water level, which is where water rests in the well when no pump is running.
Turning the Log Into a Testing Plan
Once you have the log, make a short list:
- Items to test for regardless of depth, such as bacteria and nitrate
- Items the log suggests, such as hydrogen sulfide or iron, if the water has odor or staining
- Questions for the lab about radium or other naturally occurring minerals, if the well draws from bedrock
- Any missing records to replace by asking the county
Keep a copy of the log with your water test results and maintenance notes. If the well is later serviced, sold, or repaired after flooding, the same records help the next person understand the system.
Keep It Simple
A well log is a starting point, not a verdict. Read it, note what is missing, and bring those questions to a certified lab or qualified professional. Gathering these records early gives Washington homeowners a clearer picture before any test results arrive.