Many homes in and around Washington, in Franklin County, Missouri, draw water from a private well or from equipment a previous owner installed. Public water reports for the area describe tap water as extremely hard, and homes there draw on a mix of river water and groundwater. A well or a treatment system changes what you need to check before you buy, because nobody tests a private well for you unless you arrange it. This guide covers the questions to ask and the checks to order while the purchase is still open.

Find out what the water source is

Start by confirming whether the home is on public water or a private well. Some homes have a well that feeds a whole-house system, while others have a public connection with a softener or filter added later. Ask the seller directly, then confirm the answer with the property records or the inspection report. If the home has a well, ask where it is located and whether it sits near a septic system, a field, or farm ground.

Private wells in the Franklin County and Missouri River-bottom area often run harder and carry far more iron than public supplies, which is why orange staining and iron-bacteria slime show up so often there. Deeper bedrock wells in the region can also produce a hydrogen sulfide smell, which is the rotten egg odor people notice at hot taps. Those deeper wells can carry naturally occurring radium from the Cambrian-Ordovician aquifer, and nitrate can come from nearby agricultural land or septic systems. After flooding, coliform bacteria and E. coli become a concern for any well.

Ask the seller for these records

  • Any well completion or well log on file, including depth, casing details, and the year the well was drilled.
  • Recent lab results for the well or the home's treatment system, with the date each sample was taken and the lab that ran it.
  • Service records for the softener, filter, pump, pressure tank, or ultraviolet unit, including what was replaced and when.
  • Any notes on flooding, boil advisories, or past bacteria problems at the property.
  • Information about the septic system, including the last pumping date and the location of the drain field relative to the well.
  • Any treatment chemicals the seller added, such as for shock chlorination, and when they were last used.

Treat the seller's results as a snapshot from one day. A good result from last spring does not tell you what the water is like after a wet season, so use it as a starting point rather than a final answer.

Order your own tests

Hire a testing service or use an accredited lab that gives you sampling bottles and written instructions. Ask whether the lab will test for the following items, since each one addresses a different concern in this area:

  • Total coliform bacteria and E. coli, the basic bacteria check for any well.
  • Nitrate, especially if farm ground or a septic field sits near the well.
  • Iron and manganese, which explain staining and taste problems.
  • Hardness, which tells you how much scale to expect on fixtures, appliances, and pipes.
  • Radium or gross alpha, since naturally occurring radioactive elements are a known concern in some deeper wells in the region.
  • Hydrogen sulfide, if the water has a rotten egg smell at the hot tap.

Follow the lab's sampling steps closely. A sample taken from a dirty faucet, collected after a long delay, or handled without care can give a result that does not match the water in the well. Keep the lab's paperwork with the house file.

Check the equipment, not just the water

Look at the condition of any softener, filter, or pump before you accept the seller's word on how it works. Note the brand and model of each unit so that a service provider can find parts later, but do not assume the equipment matches the water problem it was installed to fix. Ask when the filter media or resin was last replaced, and whether the unit still runs on a regular schedule. Ask the inspector to check the pressure tank, the well cap, and the casing for visible damage.

Decide what to do with the results

If the tests show bacteria, act before you move in, and plan to shock and retest the well once any repairs are complete. If the tests show high iron, hardness, or hydrogen sulfide, you can talk with the seller about a credit or repairs before closing, and you can plan the treatment setup you want. If radium, gross alpha, or nitrate results come back high, get advice from a qualified water professional on what options fit the home. Keep copies of every result and every service record, because you will need them when you schedule the next round of testing.